Adjustable Depth Insertion Magmeter
EX110 fits any 1-1/2″ pipe fitting (standard saddle, for instance) and adjusts to pipe sizes 3-10″
EX210 adjusts to pipe sizes 10-48″
Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
Accept Seametrics modules for rate and total indication, 4-20 mA conversion, data logging, and flow switching
Alternatively, signal can be sent directly to a PLC or other control
Available in brass or 316 stainless steel
Immersibility and reverse flow output available
Clean or “dirty” liquids
Call/Email us to request pricing or to order this item
The Seametrics’ EX100/200-Series are adjustable depth insertion magmeters that fit 3” to 48” pipe (up to 72” optional). The complete lack of moving parts of the EX100/200-Series is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings to wear out. Like all magmeters, when used in chemical injection applications, these meters should be installed upstream of the chemical line (or far enough downstream to allow complete mixing of fluids before the meter). Adapters mate with standard 1-1/2” (11x/21x) or 2” (15x/25x) FNPT threaded fittings such as saddles and weldolets which may be purchased either locally or from Seametrics.
A rapidly reversing magnetic field is produced in the lower housing. As the fluid moves through this field, a voltage is generated that is measured and translated into a frequency signal proportional to flow rate. This square wave signal can be sent directly to a PLC or other control or can be converted using any of the Seametrics family of indicators and converters. A modular system of electronics can be installed directly on the flow sensor or mounted remotely.
The FT430 (externally powered with pulse) and the FT440 (loop powered), both provide digital rate and total displays, as well as a programmable pulse; the FT440 also provides a 4-20 mA analog output. The AO55 is a blind analog (4-20 mA) transmitter. Programmable pulse for pump pacing is available with the PD10 (available as wallmounted unit only).
For additional details and how to order information, please review the specification sheet above. Contact us to request pricing or to order this item.