iRIS 150FX

$0.00
Available for Backorder
Product:

Data Logger With Digital Display

Power Supply

  • External DC supply: Range 5-15V. Reverse polarity/over voltage protected. Internal lithium battery: AA-size 3.6V, 2400 mA/hr on iRIS 150C or a D-size 19000mA/Hr on iRIS 150G.

Communications

  • SDI-12 instrumentation port.

  • Non-isolated DTE RS232 at 1200 - 115200 bps (default 38400 bps)

Data Storage

  • 8MB flash memory (1,048,576 samples). A typical site with 2 parameters logged every 15 minutes plus battery voltage logged hourly will give 12 years of storage before data overwrite occurs.

Environmental

  • Operating: -10ºC - +70ºC.

  • Storage: -20ºC - +85ºC

  • Enclosure: IP65 unless the USB port is opened.

Data Logger With Digital Display

Power Supply

  • External DC supply: Range 5-15V. Reverse polarity/over voltage protected. Internal lithium battery: AA-size 3.6V, 2400 mA/hr on iRIS 150C or a D-size 19000mA/Hr on iRIS 150G.

Communications

  • SDI-12 instrumentation port.

  • Non-isolated DTE RS232 at 1200 - 115200 bps (default 38400 bps)

Data Storage

  • 8MB flash memory (1,048,576 samples). A typical site with 2 parameters logged every 15 minutes plus battery voltage logged hourly will give 12 years of storage before data overwrite occurs.

Environmental

  • Operating: -10ºC - +70ºC.

  • Storage: -20ºC - +85ºC

  • Enclosure: IP65 unless the USB port is opened.

 

The iRIS 150FX is a small, compact data logger featuring an LCD display and keypad. It can be connected to a wide variety of sensors, and features two analogue (0-5V, 0-20mA) inputs, two digital inputs, SDI-12 serial instrument support and a single digital output for alarm or control purposes. Primary communication is RS232. This can be connected directly to a PC / laptop or else to a telemetry device such as the iQuest iCE3; FX for IP based communication or a radio or dial-up modem. Optional USB slave communication is available via a miniature USB slave connector. The iRIS 150FX is shipped with this connector protected behind the label. NOTE: The front panel must be voided to use the USB port. The iRIS 150FX is configured and managed using the iQuest software products iLink2012 or HydroTel™. It also supports remote firmware and software upgrades.

Available in two models:

  • iRIS 150FXC. Has an external 14 way terminal block fitted to the base of the enclosure.

  • iRIS 150FXG. Has two NG12 compression glands providing cable access to a small 12 way I/O connector inside the unit.

ORDERING OPTIONS

  • iRIS 150FXC. Has an external 14 way terminal block fitted to the base of the enclosure

  • iRIS 150FXG. Has two NG12 compression glands providing cable access to a small 12 way I/O connector inside the unit.

    ACCESSORIES

  • Computer Interface Cable, Required for Data Retrieval and Configuration

  • Environmental Enclosure

  • Rechargeable 12V Battery

  • Solar Panel

  • Solar Charge Controller

    Contact us for information and pricing on available sensors for your data logger