Image 1 of 3
Image 2 of 3
Image 3 of 3
Applications
Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications
Specifications
Output: 4-20 mA | Range: -50° to +50°C | Accuracy: ±0.2°F or ±0.1°C | Maximum Pressure Open Water: 0 to 200 psi Online: 50 psi
Operating Voltage: 10 to 36 VDC | Current Draw: Same as sensor output | Warm-up Time: 5 seconds minimum | Operating Temperature: -58° to +212°F (-50° to +100°C)
Size of Probe Open Water: ¾" dia. x 4½" long (1.9 cm dia. x 11.4 cm long) | Online: 1.7" dia. x 8" long (4.3 cm dia. x 20.3 cm long)
Weight Open Water: 8 oz (227 g) Online: 9.4 oz (272 g (Plus Cable)
Related Products
This temperature sensor can be connected to a variety of 4-20 ma compatible systems. We offer data loggers, digital displays and wireless telemetry system that can paired with your temperature sensor for a complete monitoring system. Contact us for additional details.
Brand: SignalFire Telemetry
Product: Cloud-Based Cellular Data Transmitter for Remote Monitoring
The SignalFire RANGER transmitter is sensor agnostic, connects quickly and easily, and provides power to even the most remote sensor — all without the effort and cost of trenching or cabling. Paired with your existing cloud or the SignalFire Cloud, the RANGER system is the simplest way to access all of your sensor data from one platform. Whether you’re converting an existing system or building a new system, going wireless with SignalFire means you can go live and start accessing your sensor data almost immediately.
Ideal for monitoring flow, total and rate, level and pressure, weather, water quality, rainfall and so much more.
Features
LTE CAT M1 connectivity optimized for low data usage
MQTT/SparkPlugB built-in for any MQTT-ready host
Integrated inputs/output for multi-sensors
Class I Division 2 Certified for hazardous locations
Data location from built-in GPS
SignalFire cloud monitoring/alarming service
Powers sensors from the battery or external DC Power
Shipping Note: This item ships in approximately (7 - 10) business days
For complete technical specifications and available options, please refer to the RANGER datasheet.
Novus LogBox Data Logger
2 Universal analog inputs – TC, RTD, Voltage or 4-20 mA
1 Digital input
1 Digital output
3 Line 4.5 digit display
Storage for 140,000 data points
3G Cellular and USB interfaces
Option GPS antenna
Battery or external DC supply
BRAND: Global Water/Xylem
NOTE: This product is no longer avaialable, contact us for information on other similar products.
Global Water's EZ Display features a large LCD readout that can be configured to display 4-20mA electronic sensor output values in any engineering units. The portable display is housed in a rugged, weatherproof enclosure that can be either hand held or wall mounted.
Features
Interfaces with all 2 or 3 wire 4 - 20 mA Sensors
DC or AC Power Options
Large LCD readout can display sensor output in any engineering units
Can be used for both portable and permanent installations
Rugged, weather resistant enclosure
Installation Options
Battery powered for portable hand-held or stationary applications (when no power is available). In this mode, the display stays on for as long as the display button is pushed.
External 18VDC power for continuous monitoring applications. In this mode, the display is on permanently and the 4-20 mA signal can be used to interface with process control systems or dataloggers.
Data Logger With Digital Display
Power Supply
External DC supply: Range 5-15V. Reverse polarity/over voltage protected. Internal lithium battery: AA-size 3.6V, 2400 mA/hr on iRIS 150C or a D-size 19000mA/Hr on iRIS 150G.
Communications
SDI-12 instrumentation port.
Non-isolated DTE RS232 at 1200 - 115200 bps (default 38400 bps)
Data Storage
8MB flash memory (1,048,576 samples). A typical site with 2 parameters logged every 15 minutes plus battery voltage logged hourly will give 12 years of storage before data overwrite occurs.
Environmental
Operating: -10ºC - +70ºC.
Storage: -20ºC - +85ºC
Enclosure: IP65 unless the USB port is opened.
Brand: Sommer Messtechnik
Call for pricing
SKU: 22142
Product Type: Weatherproof Data Logger W/ Integrated 4G Modem
The MRL-8 with integrated 4G modem for North America is the ideal data recording system for collecting, processing, storing and transmitting data from any 4 - 20 mA, Digital, RS485 and SDI-12 Sensors.
The MRL-8 can be paired with a variety of sensors, water level, water quality, flow meters or weather sensors. Contact us for pricing on a complete system.
Features/Benefits
Data readout with USB memory stick, Bluetooth-interface or USB or RS-232
Parameterization Via RS-232, Bluetooth, USB, Ethernet
Integrated 4G modem and weatherproof
Reliable and Power Saving
Optimized for environmental monitoring in remote sites without power
External Power Options: Battery, AC to DC Power Suppliers, Solar Panels
Integrated solar charge controller (For Solar Power Configurations)
Compatible with any 4 - 20 mA, SDI-12 or RS485 Sensors
Backlit display for data visualization or configuration
RS-232, Bluetooth, USB, or Ethernet Communication (Ethernet is an optional feature)
Solid design, compact and weatherproof aluminum housing (Powder Coated)
Remote/Wireless Data Transmission (4G Modem) (Ethernet) (Satellite - INMARSAT) (This option must be purchased with the data logger.)