Image 1 of 4
Image 2 of 4
Image 3 of 4
Image 4 of 4
-
This water level indicator also allows the user to perform unsupervised drawdown testing or long term groundwater monitoring with it's built-in data logger capable of storing up to 25 million time/date stamped data points.
These water level meters can be set to take measurements at intervals between 1-60 minutes. It also has a power save function, which will put the unit to sleep between measurements to save battery life.
The water level meter will turn on, take a measurement and turn itself back off. After you are done with the test simply return to the testing site and retrieve the Well Sounder 2010 PRO.
The logged information can be easily downloaded with the included USB Cable and will be displayed as a data file to be opened in a program of your choosing.
There is no special software required and it works with any operating system. If the data won't be downloaded immediately, take advantage of the Well Sounder's ability to give each well an ID number, which will be stored with the logged data to help keep the data organized.
-
The Well Sounder 2010 PRO also has the ability to interface with standard pulsed flow meters, such as the WS131 Flow Meter. When the flow meter option is enabled, the water level meter will measure and log total flow, flow rate and the rate of recovery of water in the well. If there are known defects in the well, such as a rock fissure, simply use the water level meters range minimum to ignore past the distance of the known interference. You can also enter the well depth and diameter which the Well Sounder will use to calculate the total water volume in the well as well as drawdown and recovery rates. This water level instrumentation will display measurements in English or Metric units.
-
In most cases, installation and use of the Well Sounder 2010 PRO is as easy as placing the probe on the vent hole and pushing the ON button. However, there are limitations such as large diameter wells (wells over 10″) or open top wells. The Well Sounder can still work on these configurations. Large diameter wells can be overcome with the installation of a sounding tube and an open top well can still be measured by creating a seal at the top of the well to keep the sound pulse contained
-
Well Sounder 2010 PRO Meter & Probe
User Manual
Quick Start Guide
US Groundwater Temperature Map
USB Cable
Carrying Case
1 Year Warranty
WS131 Flow Meter
The Eno Scientific flow meter is designed to measure water flow for monitoring well drawdown and usage. It uses a modular design consisting of a PVC housing and an electronic sensor module that easily attaches to the housing using a hand tightened ring nut. With the sensor in place, electrical pulses are generated as water moves past the paddle wheel which can be interpreted as water volume by an Eno Scientific Well Sounder or other device. When the test is complete, the sensor can be removed and replaced with an inexpensive plug using the same kind of hand tightened ring nut. This leaves the sensor port available for future testing.
