-
Select your level transmitter from the dropdown menu. 0.25% or 0.1% accuracy, preset or custom range.
Select quantity
Add to cart.
Now Select the cable type and cable length in feet.
Add cable to cart
Add a display or data logger from the option if needed.
If you selected more than 1 sensor or custom calibration, we will contact you to verify the correct calibration and cable length.
Click the “request a quote” button at anytime to receive a customized quote and product availability.
SPECIFICATIONS
Pressure Ranges - Relative | 0...4 inW/C and 0...120 inW/C |
Output | 4....20 mA + RS485 |
Accuracy, Static at 25°C | 0.1% FS |
Accuracy, Total Error Band (See Datasheet for Details) | Standard: 0.25% BR TEB Optional: 0.1% BR TEB |
Storage- / Operating Temperature | -10…60 °C |
Protection | IP68 |
Certification | EN 61000-6-1 to 6-4 / EN 61326-1 / EN 61326-2-3 |
Optional Accessories
Drying Tube Assembly - 900001.0002
Clear tube filled with indicating desiccant that attaches directly to cable vent tube to intercept water vapor. Highly recommended when operating in high humidity conditions. Must be periodically renewed as desiccant becomes saturated, turning color from blue (dry) to pink (saturated).
Bellows Assembly - 900001.0009
Alternative to the drying tube, this aneroid bellows attaches to cable vent tube and requires no periodic maintenance. Note that the use of the bellows results in a closed reference pressure system subject to zero shift errors induced by changing temperatures of up to 0.0004 psi/ºC. Not recommended for use with accuracy requirements of ±0.25% FS or better, or ranges < 2 psi.
Termination Enclosure - 900001.0034
Convenient option complementing gauge-type pressure/level transmitters where it is desired to terminate the transmitter cable close to the measurement point. It includes a NEMA 4X clear front enclosure (7.9 X 4.7 X 3.5 inches) with two, liquid-tight cable fittings (one in, one out), a terminal strip, and provisions for mounting both a drying tube or bellows assembly, each sold separately.
Cable Hanger - HU02216001
Single eye mesh cord grip style cable hanger for use with KELLER’s 0.230 inch O.D. cables, including PE, Hytrel, and Tefzel, used on Acculevel, Digilevel, Levelgage, LevelRat, Microlevel, and Nanolevel submersible level transmitters, and KELLER’s Valueline and Preciseline pressure transmitters.
Stabilizing Weight - 900001.0033
Zinc prop shaft anode adapted to fit Ø21 mm O.D. of Levelgage, Acculevel, and LevelRat submersible level transmitters. Aids in corrosion resistance as well as helps ensure that the cable remains taut in turbulent conditions.