Seametrics LevelSCOUT

Non-Vented Submersible Water Level Sensor and Data Logger Combination

Low-cost Level & Temperature Data Logger

 
 
LEVELSCOUT.jpg

The LevelSCOUT is an absolute sensor, requiring no vent tubes, desiccant, or bellows. It can be paired with a BaroSCOUT barometric sensor and used with the Aqua4Plus 2.0 Barometric Compensation Utility to adjust the LevelSCOUT readings for current atmospheric pressure.

  • Low power—4.5 year battery life

  • Integrated datalogger collects up to 50,000 records

  • Small diameter—0.875″ (2.22 cm)

  • Easily connects with other sensors via RS485 network

  • Includes Aqua4Plus and Aqua4Plus Lite control software

Features

Sensor

  • Measures level, temperature, and time

  • Thermally compensated—great where water temperatures vary, such as in streams or industrial tank applications

  • ± 0.05% FS

  • Low power—4.5 year battery life

  • 316 stainless steel, fluoropolymer, and acetal construction (titanium optional)

  • Modbus® RTU protocol—for great flexibility

Datalogger

  • Non-volatile memory—your data will not be lost in the event of a power failure

  • Pause logging feature—temporarily pause the logging while repositioning or transporting sensor

  • Delayed start feature—state a specific future start time, making it easy to set several sensors to start at the same time

Cabling & Networking

  • Wireless connectivity

  • RS485 network—allows several sensors to be networked together and provides much longer cable leads

  • Field-serviceable connectors—easily remove the connector, route cable through well seals, walls, or conduit, and then replace connector

  • Available cableless or with a user attachable PU or ETFE cable

Software

  • Comes with free Aqua4Plus and Aqua4Plus Lite control software to get you up and running immediately

  • View your data in real-time

  • Easy export to spreadsheets and databases

  • Barometric compensation utility

  • Update sensor via firmware while in the field—great for future updates

The LevelSCOUT can be utilized in many applications including:

  • Site assessments

  • Tidal studies

  • Environmental monitoring

  • Surface water discharge measurement

  • Aquifer level monitoring

  • Aquifer storage & recovery

EX800.jpg

EX800-SERIES

Fixed Depth Insertion Magmeter

Feature

  • Available for pipe sizes 1″ to 8″, in brass, 316 stainless, and PVC

  • Low-flow performance and accuracy superior to any mechanical flow sensor

  • No moving parts to wear out

  • Dedicated fittings for simplicity

  • Retainer clip automatically sets correct depth

  • Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris

  • Simple pulse train output can be used with any SeaMetrics signal processing module, or sent directly to a PLC

The EX800-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments.

The EX800-Series has a currentsinking pulse output that can be combined with the appropriate transmitter or indicator for the application. For basic rate/total and pulse output, the FT430 is best. For analog output and display of rate and total, the FT440 can be used. Blind analog output is provided by the AO55. The PD10 can be used to divide the pulse for pacing chemical metering pumps. Electronic modules can be wall- or meter- mounted. (Note: PD10 available only as wall-mounted unit.) If the EX800 meter is used with a programmable controller, the output signal can be fed direct, with no other conditioning required. 

EX800 Flow Range.png