Hot-Tap Adjustable Depth Insertion Magmeter
*Call for pricing*
BRAND: Seametrics
Model: X150/250 Series
The “hot-tap” models (EX15x/25x) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation on the pipe fitting; a bronze ball valve is standard on both models, with a 316 stainless steel valve optional if needed. In most circumstances, no special tool is required.
*Call for pricing*
BRAND: Seametrics
Model: X150/250 Series
The “hot-tap” models (EX15x/25x) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation on the pipe fitting; a bronze ball valve is standard on both models, with a 316 stainless steel valve optional if needed. In most circumstances, no special tool is required.
*Call for pricing*
BRAND: Seametrics
Model: X150/250 Series
The “hot-tap” models (EX15x/25x) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation on the pipe fitting; a bronze ball valve is standard on both models, with a 316 stainless steel valve optional if needed. In most circumstances, no special tool is required.
Features
Isolation valve allows installation and removal under pressure
Useful in large water utility pipe and other applications where shutdown is not an option
EX150 fits pipe from 3″ to 10″
EX250 fits pipe from 10″ to 48″
Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
In most applications, installation tool not necessary due to small tube diameter
Available in brass or 316 stainless steel
Standard valve material is brass, with stainless optional
Certified to NSF/ANSI 61 Standard (stainless version)
