Seametrics EX150/250 Hot-Tap Insertion Magmeter

$0.00
Model Number:

BRAND: Seametrics

The Seametrics EX150/250 is a hot-tap adjustable-depth insertion electromagnetic flow meter designed for large water lines where shutdown is not practical. Its isolation valve allows installation or removal under pressure, making it ideal for municipal water, irrigation, industrial water, cooling systems, and other large-pipe applications.

The EX150 fits 3" to 10" pipe, while the EX250 fits 10" to 48" pipe. The meter extends only about 1/8 of the pipe diameter, helping reduce clogging from debris.

Features

  • Hot-tap design allows installation and removal under pressure

  • Ideal for applications where pipe shutdown is not an option

  • Adjustable-depth insertion design

  • No moving parts for low maintenance

  • EX150: for 3" to 10" pipe

  • EX250: for 10" to 48" pipe

  • Brass or 316 stainless steel construction available

  • Standard brass valve, stainless valve optional

  • Stainless version certified to NSF/ANSI 61

  • Compatible with displays, converters, data loggers, and 4–20 mA output options

BRAND: Seametrics

The Seametrics EX150/250 is a hot-tap adjustable-depth insertion electromagnetic flow meter designed for large water lines where shutdown is not practical. Its isolation valve allows installation or removal under pressure, making it ideal for municipal water, irrigation, industrial water, cooling systems, and other large-pipe applications.

The EX150 fits 3" to 10" pipe, while the EX250 fits 10" to 48" pipe. The meter extends only about 1/8 of the pipe diameter, helping reduce clogging from debris.

Features

  • Hot-tap design allows installation and removal under pressure

  • Ideal for applications where pipe shutdown is not an option

  • Adjustable-depth insertion design

  • No moving parts for low maintenance

  • EX150: for 3" to 10" pipe

  • EX250: for 10" to 48" pipe

  • Brass or 316 stainless steel construction available

  • Standard brass valve, stainless valve optional

  • Stainless version certified to NSF/ANSI 61

  • Compatible with displays, converters, data loggers, and 4–20 mA output options


Product Overview

The Seametrics EX150/250 Series measures conductive liquids in full pipes where interrupting service is difficult. Its hot-tap design uses an isolation valve to allow sensor installation and removal under pressure, following the manufacturer’s installation procedures.

The EX150 fits 3–10-inch pipes, while the EX250 fits 10–48-inch pipes. Adjustable insertion depth and brass or 316 stainless steel construction accommodate different installations. The sensor has no moving parts and provides a pulse output for compatible controllers or optional flow indicators.

Specifications at a Glance

Technology Adjustable depth electromagnetic insertion
EX150 pipe sizes 3–10 inches
EX250 pipe sizes 10–48 inches; up to 72 inches with optional extension
Installation fitting 2-inch FNPT; full-port isolation valve assembly
Valve options Bronze standard; 316 stainless steel optional for stainless steel models
Sensor materials Brass or 316 stainless steel
Power supply 12–24 VDC; full-power and low-power versions
Minimum conductivity 20 µS/cm
Flow velocity range 0.28–20 ft/s
Accuracy ±1% of full scale
Maximum pressure 200 psi
Fluid temperature 32–200°F
Sensor output Opto-isolated square-wave pulse; 500 Hz at 20 ft/s

Select fittings and options for the specific installation. See the datasheet for configuration details and limits.

Typical Applications

  • Municipal water supply and distribution
  • Irrigation pipelines and water delivery
  • Conductive industrial process liquids
  • Clean and dirty water flow monitoring

Before You Select a Model

Confirm actual pipe dimensions, fitting configuration, liquid conductivity, flow range, pressure, temperature, and required output.

The pipe must remain full. Review straight-pipe requirements, sensor orientation, and insertion depth in the installation manual.

Displays & Output Options

Pair with an FT430 for local flow rate and total indication, or an FT440 when a 4–20 mA output is needed. The sensor requires its own external power supply; an FT440-equipped EX sensor cannot be powered solely by the 4–20 mA loop.

Documents & Installation

Product Datasheet & Flow Ranges

Review specifications, pipe-size flow ranges, materials, and model options.

View EX150/250 Specifications & Flow Ranges (PDF)
Installation & Ordering Information

Review hot-tap installation requirements, depth adjustment, wiring, and maintenance. The shared EX100/200 Series documents include EX150/250 models and ordering tables.

View Installation Manual (PDF) View EX15x/25x Quick Start Guide (PDF) View Model & Ordering Options (PDF)