Image 1 of 3
Image 2 of 3
Image 3 of 3
Lithium Ion and pH Analyzer
The Imacimus 2 lithium ion and pH analyzer is supplied with powerful analysis software that displays measurements (and allows identification) and can be customized for calibration with up to 5 personalized standard points, among other features. Continuous monitoring is also available for the study of short-term reactions or processes.
The lithium ion sensor is a replaceable module and can be swapped out for a new lithium sensor or any other sensor available.
Please note the limited lifespan of ISE sensors, even when stored on a shelf or installed in a probe. The lifespan of different sensors can vary by several months under the same conditions.
What’s included with your Imacimus 2 Lithium + pH Meter ( KIT PRO1073-LI)
Dual Channel ION/mV/pH for use with PC/Laptop.
Software for Windows
USB cable for data/power
Single ION PROBE.
Mini Lithium Electrode
Reference electrode/pH
Calibration Standard 10 mg/L Lithium (100 mL)
Calibration Standard 100 mg/L Lithium (100 mL)
Calibration Standard 1000 mg/L Lithium (100 mL)
pH buffers 4/7 (2x50ml)
Deionized water (50 mL)
User manual
SPECIFICATIONS - Lithium ISE Meter
ISE range0.1 to 5,000 mg/L
ISE/pH resolution0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9,999 ppm is 1 ppm
ISE accuracy±4 % or 8 % * In the absence of interfering ions, the accuracy may be better than ±1 mV, i.e. corresponding to ±4 % of the measurement.
(For divalent ions, ±2 mV; ± 8 %)
Repeatability ISE±10% monovalent ±20% divalent ** Repeatability in the measurement of a standard solution after calibration.
ISE/pH calibrationFrom 2 to 5 points.
Fully customizable calibration standards.
Power SupplyUSB – 5V – 0.5A
Temperature range4-40 ºC
Interface Imacimus Windows software application ws
ConnectivityMini USB female connector type AB
MethodElectrochemical / ISE
