WS700R Refrigerated Water Sampler_AWM Instruments
WS700R Control Panel for Refrigerated Water Sampler_AWM Instruments
WS700R Water Sampling System Showing The Inside of the Unit_AWM Instruments
WS700R Refrigerated Water Sampler_AWM Instruments
WS700R Control Panel for Refrigerated Water Sampler_AWM Instruments
WS700R Water Sampling System Showing The Inside of the Unit_AWM Instruments

WS700R Refrigerated Water Sampler

$2,807.00

Brand: Global Water/xylem

Model: WS700R

Features

Sample Size control allows you to take time-weighted composite samples from 50 ml to 2 liters

Trigger inputs to control sample collection

Cooling unit can be plugged into a battery unit or external source.

Automatic backflush clears pickup strainer and hose

Add To Cart

The WS700R Refrigerated Wastewater Sampler gives you complete control over your water sampling process. With the water sample size control, you can take individual time-weighted samples or full bottle descrete samples in a 2-gallon sample bottle. The water sample interval control allows you to set the time between individual refrigerated composite samples, or enable the external trigger mode for flow proportional sampling.

 
Refrigerated Water Sampler Specifications

Specifications

Operating Temperature 0° to +70°C

Materials Enclosure: Expanded UV protected PVC

Bottle: 2.5 gallon Polyethylene0

Pickup Hose: 15’ reinforced PVC 1/4” ID polyethylene flexible tubing section with intake strainer

Pump Tubing: Norprene® 1/4” ID, 7/16” OD

Sample Pump Flow Rate: 1000 ml per minute at a 4 foot head Type: Peristaltic Maximum Lift: ~20 feet

Battery: Rechargeable 5 AH Gel Cell Battery Life ~1 hour continuous pumping under load Standby: 3 months while still retaining enough power to run the pump to capacity is required.

Start Delay 16 time settings from 0 to 12 hours

Composite Interval: 15 time settings from 5 min. to 12 hours plus an external trigger mode setting

Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a full bottle discrete setting (approximate sizes at 4 foot head)

External Trigger Input(s): 250mS minimum pulse width switch closure or 4 to 24VDC

Pulse Output(s): 5VDC one-second pulse, 1000ohm output impedance

Bottle Switch Input(s): Switch closure input, float switch in bottle Rain and Water Sensors Optional moisture sensors or switch closure inputs

Internal Fuse: 10A Slow-Blow Certificates CE Compliance

Dimensions: 26.25” H X 20.5” W X 21.25” D (10 x 8 x 8.5 cm)

Weight 38 lbs/17 kg (shipping weight 43 lbs/19.5 kg