Inline Dissolved Oxygen and Temperature Analyzer
Model: 6312DTF/6312DTB
Brand: JENCO
Cost-effective water monitoring instrumentation solutions
Features
Graphic LCD with manual backlight displays dissolved oxygen, temperature, relay status, and transmitter current mA output simultaneously.
Calibration data is stored in memory and is ready for use on power-up.
Two sets of isolated and reversible 4 ~ 20 mA current output for dissolved Oxygen and temperature allow it to be used as a proportional output.
4 programmable on/off relays: 3 for dissolved oxygen and 1 for temperature.
RS-485 output for remote access allows multiple units to be connected and daisy-chained together.
Password protection.
IP65
***FREE GROUND SHIPPING, U.S. CUSTOMERS ONLY*** Does not include HI, and AK.
Dissolved Oxygen, Temperature In-line Analyzer. 1/4 DIN, IP65, panel mount DO/Temp analyzer with two sets of 2 wire 4 ~ 20 mA current output, 2 sets of programmable on/off relays, RS-485 output, and backlight
Accesories/Probes for model 6312 DTF ( Contact us for pricing and additional details)
237150: Oxysense 120 Wastewater W/ Membrane & 5-Meter Cable
237450: Oxyferm FDA 120 Sterilizable For Fermentation, No Cable
355088: Oxyferm Cable 3-Meter Cable For Oxyferm 120
355089: Oxyferm Cable 5 Meter Cable For Oxyferm 120
355136: Oxyferm Cable 10 Meter Cable For Oxyferm 120
237135: DO Membrane Kit
-
DO Range: 0.000 to 40.000 ppm / 0 to 40000 ppb
DO Resolution: 0.001 ppm / 1 ppb
DO Accuracy: ±0.2% F.S.
DO% saturation Range: 0.0 to 500.0%
DO% saturation Resolution: 0.1%
DO% saturation Accuracy: ±0.2% F.S.
Temperature Range: -10.0 to 120.0 °C
Temperature Resolution: 0.1 °C
Temperature Accuracy: ±0.1 °C
Salinity Compensation: Manual 0.0 to 49.9 ppt
Pressure Compensation: Manual 600 to 4000 mBar
Temperature Compensation: Auto -10.0 to 80.0°C, 22K ohm NTC
Current Output: Two current outputs for dissolved oxygen and temperature (4 ~ 20 mA)
Current Output Scale: User programmable ,linear
Maximum Load: 500 ohm
Isolation Voltage: 500 VDC
Control Type: 4 ON/OFF controls
Relay Output: 5 A at 115 VAC or 2.5 A at 220 VAC, resistive load only
Digital output: RS-485
Display: 128 x 64 graphical LCD with backlight
Security: 4-dight password
Power: 115 VAC or 230 VAC at 50/60 HZ factory pre-set
Ambient Temperature Range: rom 0 to 50 °C
Weight/Case: 950 grams / IP 65 ,1/4 DIN case, 148 mm depth