pH and mV Controller
Model: 6313
Brand: JENCO
Features
Clear LCD displays pH or mV, with temperature and relay status simultaneously.
Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power-up.
Displays absolute and relative ORP.
Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
2 programmable on/off relays: 2 for pH or ORP.
CE Approved
Password protection.
IP65
1/4 DIN, IP65, panel mount pH/ORP/Temp analyzer with 4-20mA current output and 2 sets of programmable on/off relays.
The list of probes below are compatible with the following Jenco Analyzers/Controllers: 6TX, 6308PT, 6311, 6313 meter
Contact us for pricing and additional details.
IP-600-10/20T IP-600-10/20T: pH Electrode 3/4" NPT, 20-ft, Tinned Leads, No ATC
pHF-020ST pHF-020ST: pH Electrode 3/4" NPT, 20-ft, Spade Plug, Tinned Leads, No ATC
pHF-020ST/TH pHF-020St/Th: pH/Temperature Electrode 3/4" NPT, 20-ft, Spade Plug, Tinned Leads, 10k ATC
IP-600-10
Industrial pH Electrode (Flat Tip) PPS housing with 3/4” threads front and rear and BNC connector, includes 5 m cable.
pH Range——Operating Temperature
0 to 14 pH——0 to 80 °C
Pressure Tolerance Range 1——Pressure Tolerance Range 2
75C/170F = 100 psig——————81C/180F = 85 psig
Pressure Tolerance Range 3——Reference Type
100C/212F =50 psig——————Ag/AgCl, double Junction
Thread————————————3/4″NPT
Connect Material——Sensor Material
PPS————————-Glass
Connector———BNC or other
Cable length: Call for additional info.
IR-500-8
IR-500-8/20T ORP Electrode, Flat Tip, No ATC, 3/4" NPT, 20-ft Cable, Tinned Leads Use With All Controller Meters Without BNC Connection $
IR-500-8/20B ORP Electrode, Flat Tip, No ATC, 3/4" NPT, 20-ft Cable, BNC Use With All Controller Meters With BNC Connection
ORPF-010B ORP Electrode, Flat Tip, No ATC, 3/4" NPT, 10-ft Cable, BNC Use With All Controller Meters With BNC Connection
ORPF-020B ORP Electrode, Flat Tip, No ATC, 3/4" NPT, 20-ft Cable, BNC Use With All Controller Meters With BNC Connection
ORPF-020T ORP Electrode, Flat Tip, No ATC, 3/4" NPT, 20-ft Cable, Tinned Leads Use With All Controller Meters Without BNC Connection
ORP Range: -2000 to 2000 mV
Operating Temperature: 0 to 80 °C
Pressure tolerance: 100 psig (at 25 °C)
Reference Type: AgCl, double Junction
Thread: 3/4″NPT
Sensor Material: Pt
Connector: BNC or other
Cable Length: 5 m or other
SPECIFICATIONS
pH Range
-2.00 to 16.00 pH
pH Resolution
0.01 pH
pH Accuracy
±0.1% of reading ± 1 digits
ORP Range
-2500 to 2500 mV
ORP Resolution
1 mV
ORP Accuracy
±0.1% of reading ± 1 digits
Temperature Range
-10.0 to 120.0 °C
Temperature Resolution
0.1 °C
Temperature Accuracy
±0.1 °C ± 1 digit
pH Buffer Recognition
US (4.01 ,7.00 ,10.01) or NIST (4.00,6,86,9.18), user selectable
pH Electrode Offset Recognition
±100 mV at 7.00 pH /-91.7 mV to 108,3 mV at 6.86 pH
pH Electrode Slope Recognition
±30% at 4,00 , 4,01 ,9.18 or 10.01 pH
Temperature Compensation
Auto -10.0 to 120.0°C (Thermistor , 10K ohm /Resisotr,Balco 3K ohm at /RTD, PT-1000 )
Input Impedance
>1013 ohms
Input Select
User selectable pH or ORP
Current Output Range
4 to 20 mA (isolated), programmable span
Current Output Scale
User programmable ,linear
Maximum Load
500 ohm
Isolation Voltage
500V DC
Control Type
2 ON/OFF controls
Relay Output
5 A at 115 VAC or 2.5 A at 220 VAC, resistive load only
Security
4-dight password
Power
115 VAC or 230 VAC at 50/60 Hz
Ambient Temperature Range
From 0 to 50 °C
Weight
940 grams
Case
IP 65 ,1/4 DIN case, 148mm depth