Groundwater Monitoring

What is groundwater?

Groundwater is water that can be found under the Earth’s surface, in the ground. Some people think groundwater is like a large lake or river underground, but that isn’t the case. Groundwater is more like the liquid trapped in a sponge, or the liquid in a glass of ice water. 

When permeable layers of rock, sand, or gravel store and transmit enough groundwater to provide usable quantities to wells, then the layers are called aquifers. The type of underground materials can influence how much water is stored, and how it moves into or flows through the ground.

Groundwater & Well Monitoring

Measure and record groundwater levels, temperature and conductivity in monitoring wells. Explore our instruments and data collection options for aquifers studies, pumping test and long-term monitoring.

Long-term monitoring using a submersible pressure transducer

Groundwater monitoring well installation Conceptual cross section showing a well casing, sensor cable, water table, and submerged water level sensor. BENEATH THE SURFACE Well casing Sensor cable Water table Submersible sensor Saturated zone

Conceptual installation. Configuration varies by site and instrument.

Water Level & Temperature

Track changes over time.

Conductivity

Follow changes in groundwater conditions.

Data Logging & Telemetry

Collect data on site or remotely.

Groundwater & Well Monitoring Equipment

Explore manual water level meters, non-contact monitors, submersible sensors, and data loggers.

Geotech tape water level meter on a reel
Manual Water Level Measurement

Geotech ET & ETL

A portable tape water level sounder for manually measuring depth to water in wells. Lower the probe until an audible signal and indicator light confirm water contact, then read the depth from the marked tape.

View Product
Ravensgate portable sonic water level meter
Portable Non-Contact Measurement

Ravensgate Model 300

A portable, non-contact water level meter that uses sound waves to measure depth to water in wells. It sends an acoustic signal down the well and calculates the distance from the returning echo, without lowering a probe or tape into the water.

View Product
Eno Scientific Well Watch 670 sonic water level monitor
Continuous Non-Contact Monitoring

Eno Scientific Well Watch 670

A permanently installed, non-contact water level monitor that uses sound waves to measure depth to water in wells. It mounts at the wellhead and automatically records water level changes, drawdown, and recovery with its built-in data logger.

View Product
Seametrics PS9800 submersible level and pressure transmitter
Submersible Level & Pressure

Seametrics PS9800

A submersible pressure transmitter that measures water level by sensing the pressure of the water above it. Installed below the water surface in a well, it sends a continuous 4–20 mA signal to a connected data logger, display, or telemetry system.

View Product
Seametrics LevelSCOUT 2X product image
Water Level & Temperature Logging

Seametrics LevelSCOUT 2X

A battery-powered, submersible data logger that records water level and temperature at programmed intervals. Installed below the water surface in a well, it stores readings internally for later download. Its absolute pressure sensor requires barometric compensation for accurate water level measurements.

View Product
Seametrics CT2X submersible conductivity and temperature data logger
Conductivity & Temperature Logging

Seametrics CT2X

A submersible conductivity and temperature sensor with built-in data logging. It measures water’s ability to conduct electricity to help track changes in dissolved salts, storing readings for later download. An optional pressure sensor adds water level measurement.

View Product

Groundwater Sampling & Well Purging

Collect groundwater samples, filter samples for analysis, and remove standing water from monitoring wells.

QuickFilter disposable groundwater filter with bailer interface tube
Groundwater Sample Filtration

QuickFilter 0.45 Micron

A disposable groundwater sample filter with a 0.45-micron membrane for preparing samples for dissolved metals analysis. Its included interface tube connects to a compatible bailer, allowing water to pass through the filter into a sample container.

View Product
SinkFast disposable groundwater sampling bailer
Manual Groundwater Sampling

SinkFast® Disposable Bailer

A disposable sampling container lowered into a monitoring well to collect groundwater for analysis. Its weighted design helps it sink quickly, while its one-liter capacity provides a practical option for manual sample collection.

View Product
Geotech 12 volt submersible groundwater purging pump
Monitoring Well Purging

Geotech 12V Purging Pumps

A submersible electric pump used to remove standing water from monitoring wells before sampling. Powered by an external 12V DC source, it moves water to the surface through discharge tubing. Multiple pump configurations are available to suit different pumping depths.

View Product

Don’t see what you need?

Explore additional product options with help from our instrumentation specialists.

Contact Us for More Information